Canon 3807B007 User Manual page 860

Printer Parts > Control Panel
Adjust
Printer
8
842
Main-
te-
nance
Menu Settings
>
Setting Item
Feed Adj. Auto(OtherPaper)
Priori- Quali-
ty ty
Manual
Adjust Ad-
Length just-
ment-
Print
Chang
e Set-
tings
Adj Far Ed Feed
Cali- Auto Adjust
bra-
tion
Calibration Log
Use Adj. Value
Return Defaults
Head Cleaning
Nozzle Check
The printer prints and reads a test pattern for auto-
matic adjustment of the feed amount. Note that this
function takes more time and consumes more ink
than Auto(GenuinePpr). (See "Automatic Banding
Adjustment (Adj. Quality).")
Use this mode with highly transparent media or other
paper for which Auto(GenuinePpr) or Auto(Other-
Paper) cannot be used.
Print a test pattern for adjustment of the feed amount
based on the type of paper. (See "Manual Banding
Adjustment (Adj. Quality).")
A:High Print a test pattern for particular types of paper to
compensate for paper stretching or shrinkage, after
B:Standard/
which you enter the amount of adjustment. (See
Draft
"Adjusting Line Length (Adjust Length).")
→P.776
A:High Displayed when you have selected Feed Priority >
Adj. Priority > Print Length.
B:Standard/
Adjustment relative to the amount of stretching or
Draft
shrinkage of the current paper.
Enter either the adjustment results from Adjust-
mentPrint or the discrepancy that you measured (as
a percentage).
For paper that tends to stretch, increase the feed
amount by choosing a higher adjustment value. For
paper that tends to shrink, decrease the feed amount
by choosing a lower adjustment value.
Choose Yes to adjust the feed amount for the trailing
edge.
Choose Yes for automatic adjustment of the adjust-
ment value after a test pattern for color calibration is
printed. The new color calibration adjustment value
is applied in all print jobs.
Check the date when color calibration was executed,
as well as the type of paper used, as shown on the
Display Screen.
Choose Disabled > OK if you prefer not to apply the
color calibration adjustment value in print jobs. The
printer driver settings will be used instead.
Choose Enabled > OK to apply the color calibration
adjustment value in print jobs. However, printer driv-
er settings are given priority.
Clear the color calibration adjustment value and the
execution log.
Clean the Printhead. (See "Cleaning the Print-
head.")
Choose Head Cleaning A if printing is faint, oddly
colored, or contains foreign substances.
Choose Head Cleaning B if no ink is printed at all,
or if printing is not improved by Head Cleaning A.
Print a test pattern to check the nozzles.
Description, Instructions
→P.772
→P.774
→P.910
iPF6300