Dell 1600n Multifunction Mono Laser Printer User Manual page 160

NOTE: To receive a printed or screen displayed message when PS errors occur, open the
Print Options window and click the desired selection next to the PostScript errors section.
Problem
PostScript file can not
be printed.
"This job contains
binary data..."
message appears.
A PS error page
prints.
The optional Tray 2 is
not selected in the
driver.
Possible Cause
The PostScript option may
not be installed.
The pure binary data
option is not supported by
the PostScript driver.
Print job may not be PS.
The printer driver has not
been configured to
recognize the optional
Tray 2.
Solution
Print a configuration page and verify that the PS
version is available for printing.
Open the Properties of the PostScript driver, click
on PostScript, and click on Advanced. The pure
binary data option is not supported. Choose
another.
Make sure that the print job is a PS job. Check to
see whether the software application expected a
setup or PS header file to be sent to the multi-
function printer.
Open the PostScript driver properties and set the
Option Tray item of the Device option to
Installed.