Paper has jammed in the fuser area.
[Paper Jam
2]
Check Inside
The power has been turned off and then
Power
on and the printer's memory has not been
Failure
saved.
The group dial location is already
Registered
registered with another speed dial
number.
The multi-function printer is waiting for a
Retry
specified time interval to redial a
Redial?
previously busy station.
The toner is almost empty.
[Toner Low]
The toner cartridge is empty.
[Toner
Empty]
Replace
Toner
Solving Problems
The following chart lists some conditions that may occur and the recommended solutions. Follow the
suggested solutions until the problem is corrected. If the problem persists, contact Dell.
Paper Feeding Problems
Clear the jam. See
page
The printer's memory was not saved
due to a power failure. The job will
need to be started over.
Select another group dial location.
You can press <Select>to immediately
redial, or <Cancel> to cancel the redial
operation.
Take out the toner cartridge and gently
shake it. By doing this, you can
temporarily reestablish printing
operations.
OR
Replace the toner cartridge with a new
one for the best print quality. See
page
157.
Replace the toner cartridge with a new
one.
167.