Displaying Trace Data; Clearing Trace Data - Fujitsu SOFTUNE F2 MC-16 User Manual

CHAPTER 2 DEPENDENCE FUNCTIONS
2.1.11.2

Displaying Trace Data

Data recorded in the trace buffer can be displayed.
■ Displaying Trace Data
The trace window or command window displays how much trace data is stored in the trace buffer.
• Trace window
Select [Refresh] in the trace window shortcut menu.
• Command window
Enter the SHOW TRACE command.
■ Display Format of Trace Data
There are two display formats of the trace data.
• Instruction: The instruction operation is displayed in disassembly units.
• Source: This mode only displays source lines.

■ Clearing Trace Data

Either of the following methods can be used to clear data in the trace buffer.
• Window
Select [Clear] in the trace window shortcut menu.
• Command
Enter the CLEAR TRACE command.
54