Setting/Release Of Debug Functions - Fujitsu SOFTUNE F2 MC-16 User Manual

CHAPTER 2 DEPENDENCE FUNCTIONS
2.6.4.1

Setting/Release of Debug Functions

The debug function can be set or released while executing the user program.
■ Commands Available during Execution of User Program
A specific debug feature can be set/released while executing the user program in this emulator debugger.
Either the dialog or the command can be set/released.
Table 2.6-1 shows the commands available during execution of user program. For more details, see
"● Debugger" in "SOFTUNE Workbench Command Reference Manual".
Table 2.6-1 Commands Available during Execution of User Program
Reset MCU
Memory operation (read/write)
Line assemble/disassemble
Set/delete breakpoint
Set/delete sequencer
Trace operation
*1 : Refer to "SOFTUNE Workbench Command Reference Manual".
282
Function
Major Command name
1.3 RESET
5.1 EXAMINE
5.2 ENTER
5.3 SET MEMORY
5.4 SHOW MEMORY
5.5 SEARCH MEMORY
5.8 COMPARE
5.9 FILL
5.10 MOVE
5.11 DUMP
6.1 ASSEMBLE
6.2 DISASSEMBLE
3.1 SET BREAK (type1)
3.3 SET BREAK (type3)
3.6 CANCEL BREAK
3.7 ENABLE BREAK
3.8 DISABLE BREAK
3.10 SET DATABREAK (type2)
3.12 CANCEL DATABREAK
3.13 ENABLE DATABREAK
3.14 DISABLE DATABREAK
3.22 SET EVENT(type 2)
3.24 CANCEL EVENT
3.25 ENABLE EVENT
3.26 DISABLE EVENT
3.27 SET SEQUENCE (type1)
3.34 CANCEL SEQUENCE(type 1)
3.36 ENABLE SEQUENCE(type 1)
3.38 DISABLE SEQUENCE(type 1)
4.15 CLEAR TRACE
4.17 ENABLE TRACE (type2)
4.19 DISABLE TRACE (type2)
4.20 SEARCH TRACE
*1