Dell 5210n Mono Laser Printer User Manual page 67

Understanding the Operator Panel Messages
The printer operator panel displays messages describing the current state of the printer and indicates possible printer problems you must resolve. This
chapter provides a list of all printer messages, explains what they mean, and tells you how to clear the messages.
The following table lists the messages in alphanumerical order. You can also locate a message using the index.
Message
30 Invalid refill, change cartridge
31 Replace defective print cartridge
32 Replace unsupported
print cartridge
32 Replace unsupported toner
cartridge
34 Short Paper
35 Insufficient memory to support
Resource Save feature
37 Insufficient memory to collate job
37 Insufficient memory for Flash
Memory Defragment operation
37 Insufficient memory, some held
jobs were deleted
38 Memory Full
39 Page is too complex to print
50 PPDS font error
Action
Install a new cartridge.
For more information, see Replacing the Toner
Remove the print cartridge, and install a new one.
For more information, see Replacing the Toner
Remove the print cartridge, and install a supported one.
For more information, see Replacing the Toner
Remove the toner cartridge, and install a supported one.
For more information, see Replacing the Toner
Press the Select button
l
The printer does not automatically reprint the page that prompted the message.
Check tray length and width guides to ensure paper is properly fitted in the tray.
l
Make sure the print job is requesting the correct size of paper.
l
Adjust the Paper Size setting for the size paper you are using.
l
If MP Feeder Size is set to Universal, make sure the paper is large enough for the formatted data.
Cancel the current job.
l
Press the Select button
l
To enable Resource Save after you get this message:
l
Make sure the link buffers are set to Auto, then exit the menus to activate the link buffer changes.
¡
When Ready is displayed, enable Resource Save.
¡
Install additional memory. For more information, see
l
Press the Select button
l
job.
Cancel the current job.
l
Press the Select button
l
Delete fonts, macros, and other data in printer memory.
l
Install additional printer memory. For more information, see
l
The printer deleted some held jobs in order to process current jobs.
Press the Down arrow button
message.
Press the Select button
l
The job may not print correctly.
Cancel the current job.
l
Install additional printer memory. For more information, see
l
Press the Select button
l
The job may not print correctly.
Cancel the current job.
l
Install additional printer memory. For more information, see
l
Press the Select button
l
The job may not print correctly.
Cancel the current job.
l
Cartridge.
Cartridge.
Cartridge.
Cartridge.
to clear the message and continue printing.
to disable Resource Save and continue printing.
Installing Printer
to print the portion of the job already stored and begin collating the rest of the
to stop the defragment operation and continue printing.
Installing Printer
until appears next to Continue, then press the Select button
to clear the message and continue printing.
Installing Printer
to clear the message and continue printing.
Installing Printer
to clear the message and continue printing.
Memory.
Memory.
to clear the
Memory.
Memory.