Dell 5210n Mono Laser Printer User Manual page 62

displayed in the Font Name menu
item.
Font Name Identifies a specific font from the
specified font source.
Symbol Set Determines the symbol set for a
specified font name.
Emulation Changes the point size for scalable
Settings typographic fonts.
Specifies the font pitch for scalable
monospaced fonts.
Determines how text and graphics
are oriented on the page.
Determines the number of lines that
print on each page.
Sets the width of the logical page
for A4 size paper.
Specifies whether the printer
automatically performs a carriage
return after a line feed control
command.
Specifies whether the printer
automatically performs a line feed
after a carriage return control
command.
Tray Configures the printer to work with
Renumber printer drivers or applications that
use different source assignments
for the paper trays.
Disk Displays all fonts downloaded to printer RAM.
Flash Displays all fonts stored in flash memory.
Download Displays all fonts stored on the printer hard disk.
NOTE: The hard disk is an optional item and is not included in the printer.
Contact your local Dell Sales Representative to determine availability.
All Displays all fonts available to the printer from all sources.
R0 Courier* The font name and font ID for all fonts in the selected font source are displayed.
The font source abbreviation is R for resident, F for flash, K for disk, and D for
download.
10U PC-8* (US) A symbol set is a set of alphabetic and numeric characters, punctuation, and
special symbols used when printing with a selected font. Symbol sets support the
different requirements for languages or specific applications, such as math
(country/region-
symbols for scientific text. Only the symbol sets supported for the selected font
specific factory default
name are displayed.
values)
12U PC-850* (non-
US)
(country/region-
specific factory default
values)
Point Size: Point size refers to the height of the characters in the font. One point equals
1.00–1008.00 (12*) approximately 1/72 of an inch. You can select point sizes from 1 to 1008 in
increments of 0.25 points.
NOTE: Point Size is only displayed for typographic fonts.
Pitch: Pitch refers to the number of fixed-space characters in a horizontal inch of type.
0.08–100.00 (10*) You can select a pitch from 0.08 to 100 characters per inch (cpi) in increments of
0.01 cpi. For nonscalable monospaced fonts, the pitch is displayed but cannot be
changed.
NOTE: Pitch is only displayed for fixed, or monospaced, fonts.
Orientation: Portrait prints text and graphics parallel to the short edge of the paper.
Portrait*
Landscape
Landscape prints text and graphics parallel to the long edge of the paper.
Lines per Page: The printer sets the amount of space between each line (vertical line spacing)
1–255 based on the Lines per Page, Paper Size, and Orientation menu items. Select
60* (US) the correct Paper Size and Orientation before changing Lines per Page.
64* (non-US)
A4 Width: NOTE: The 203 mm setting makes the logical page wide enough to print eighty
198 mm* 10-pitch characters.
203 mm
Auto CR after LF: Off — Printer does not perform a carriage return after a line feed control
Off* command.
On
On — Printer performs a carriage return after a line feed control command.
Auto LF after CR: Off—Printer does not perform a line feed after a carriage return control command.
Off* On—Printer performs a line feed after a carriage return control command.
On
Assign MP Feeder: Off — Printer uses factory default paper source assignments.
Off*
None
None — Paper source ignores the Select Paper Feed command.
0–199
0–199 — Select a numeric value to assign a custom value to a paper source.
Assign Tray [x]: Off — Printer uses factory default paper source assignments.
Off*
None
None — Paper source ignores the Select Paper Feed command.
0–199
0–199 — Select a numeric value to assign a custom value to a paper source.
Assign Env Feeder: Off — Printer uses factory default paper source assignments.
Off*
None
None — Paper source ignores the Select Paper Feed command.
0–199
0–199 — Select a numeric value to assign a custom value to a paper source.
Assign Man Paper: Off — Printer uses factory default paper source assignments.
Off*
None
None — Paper source ignores the Select Paper Feed command.
0–199
0–199 — Select a numeric value to assign a custom value to a paper source.
Assign Man Env: Off — Printer uses factory default paper source assignments.
Off*
None
None — Paper source ignores the Select Paper Feed command.
0–199
0–199 — Select a numeric value to assign a custom value to a paper source.
View Factory Def Displays the factory default value assigned to each paper source.
Restore Defaults Select Yes to return all tray assignments to factory default values.