For example, if you have the same size and type of print media loaded in tray 2 and tray 4, the printer selects print media from tray 2 until it becomes empty,

and then the printer automatically feeds print media from the next linked tray — tray 4.

By linking all trays (standard and optional), you effectively create a single source with a capacity of up to 2,600 sheets.

Make sure you load the same size and type of print media in each tray in order to link the trays. Set the paper size and type for each tray.

To set the paper type or size:

1. Press the Menu button

on the operator panel.

2. Press the Down arrow button

3. Press the Down arrow button

4. Press the Down arrow button

5. Press the Down arrow button

6. Press the Down arrow button

7. Press the Down arrow button

The printer returns to Ready.

To disable tray linking, set the Paper Type to a unique value in each one of the trays. If all the trays do not have the same type of print media when they are

linked, you could mistakenly print a job on the wrong paper type.

Identifying and Linking Output Bins

There is one standard output bin that holds 250 sheets. If you need additional output capacity, you can install up to three optional output expanders.

If you have multiple output bins, you can link them into a single output source. Linking output bins lets the printer automatically switch output to the next

available bin.

Output bins available

The following table provides information on standard and optional output bin capability and connectivity.

NOTE:

Not all output bins support every paper and envelope size.

Output Bin Name

Print Media

Standard bin

Output expander

until

appears next to Paper Menu, and then press the Select button

until