Table of Contents
Advertisement
To insert a module, press out the securing clip at each end of the memory module
5
connector.
Align the notch on the bottom of the module with the crossbar in the connector.
6
NOTICE: To avoid breaking the memory module, do not press near the middle of the module.
Insert the module straight down into the connector, ensuring that it fits into the
7
vertical guides at each end of the connector. Press firmly on the ends of the module
until it snaps into place.
If you insert the module correctly, the securing clips snap into the cutouts at each end
of the module.
88
Re m ov i n g a n d I ns t al l i n g Pa r t s
memory connector closest
to microprocessor
notch
memory module
cutouts (2)
securing clips (2)
connector
crossbar
Advertisement
Table of Contents
