Table of Contents
Advertisement
PLAYING A DISC
Subtitle Language
The VCR/DVD allows you to select a language for subtitle
during DVD disc (if available) playback.
1
Press SUBTITLE during playback.
2
Press SUBTITLE repeatedly to select your desired subti-
tle language.
• The selected language will be displayed on the display
bar at the top of the screen.
3
To turn off subtitles, press SUBTITLE repeatedly until
OFF appears.
NOTES:
• Some discs allow audio language setting/subtitle lan-
guage setting on the disc menu. (Operation varies
between discs, so refer to the manual accompanying the
disc.)
• If the desired language is not shown after pressing SUB-
TITLE several times, the disc does not have subtitles in
that language.
• If you choose a Language that has a 3 letter language
code, the code will be displayed every time you change
the Subtitle language setting. If you choose any other
languages, '---' will be displayed instead. (Refer to page
29.)
• Pressing SUBTITLE may not work on some DVDs with
multiple subtitle languages (e.g. DVDs which allow sub-
title language setting on the disc menu).
Camera Angle
Some DVDs contain scenes which have been shot simulta-
neously from various angles. You can change the camera
angle when the (
) icon appears on the screen. If the
ANGLE ICON setting is OFF in the Display setting, the (
icon will not appear. (Refer to page 28.)
1
Press ANGLE during playback.
• The selected angle will be displayed on the display bar
at the top of the screen.
2
Press ANGLE repeatedly to select your desired angle.
DVD
DVD-RW
VR mode
You can check information about the current disc by pressing
DISPLAY on the remote control.
DVD
)
– 26 –
Changing the On-Screen Display
1
Press DISPLAY during playback to show current Chapter.
• The elapsed and remaining playing time of the current
chapter will be displayed.
2
Press DISPLAY again to show current Title.
• The elapsed and remaining playing time of the current
title will be displayed.
3
Press DISPLAY again.
• The BIT RATE and the cur-
rent repeat setting will be dis-
played.
• If you are playing a dual layered disc, the layer number
will also be displayed (L0: Layer 0 is playing. L1: Layer
1 is playing).
If you are playing a DVD-RW
with the PLAYLIST, the following
will also be displayed.
ORG: Playing the ORIGINAL.
PL: Playing the PLAYLIST.
4
Press DISPLAY the fourth time to remove the display.
1
Press DISPLAY during playback, the current Track will be
displayed on the TV screen.
• The elapsed and remaining playing time of the current
track will be displayed.
2
Press DISPLAY again to show current Total Track.
• The elapsed and remaining playing time of the current
total track will be displayed.
3
Press DISPLAY again to remove the display.
1
Press DISPLAY during playback of an MP3 or JPEG
disc.
• The name of the file currently in play will be displayed.
2
Press DISPLAY again to show the track number, the
elapsed time (for MP3 only), the repeat status, and the
playback status at the top of the screen.
•
will be displayed when the repeat play has been
selected.
T- indicates Track repeat
G- indicates Group (folder) repeat
A- indicates All (disc) repeat
3
Press DISPLAY again to exit.
DVD
DVD-RW
VR mode
9/49
0:00:00 -0:00:00
IIII
T
ORG
CD
VCD
without PBC function
JPEG
MP3
EN
Advertisement
Table of Contents
