Table of Contents
Advertisement
VCR OPERATION
• FOR DAILY RECORDING : To record a TV programme
at the same time on the same channel, from Monday to
Friday.
Press DAILY/WEEKLY repeatedly to select DAILY (MO-
FR), then press the S
• FOR EVERYDAY RECORDING : To record a TV pro-
gramme at the same time on the same channel every
day.
Press DAILY/WEEKLY repeatedly to select DAILY (MO-
SU), then press the S
• FOR WEEKLY RECORDING : To record a TV pro-
gramme at the same time on the same channel every
week.
Press DAILY/WEEKLY repeatedly to select WEEKLY,
then press the S
HOW
NOTES:
• If the S
V
number is not available, it will be
HOW
IEW
cleared automatically when you press the S
button. Enter the correct S
the S
button again.
V
HOW
IEW
• If the S
V
number flashes when you press the
HOW
IEW
button, this means that the S
S
V
HOW
IEW
ber you entered was incorrect or the timer recording
you just programmed and another timer recording
overlap.
4
Confirm the channel number, then press B.
• If your local channel information is programmed in
VCR/DVD's memory, your local channel number
appears automatically.
• If your local channel information is not programmed in
VCR/DVD's memory, "– –" or an incorrect channel
number may appear. In this case, press K or L
repeatedly until your desired channel number appears.
Then, press B.
• When you select the channel number using K or L, it
memorises in VCR/DVD's memory.
5
Press K or L repeatedly until the desired tape speed
appears.
6
Press K or L to set VPS/PDC ON or OFF.
7
Press MENU to exit.
8
Press TIMER ON/OFF to activate the timer.
TIMER indicator on the VCR/DVD comes on.
Auto Return
If there are any remaining programmes including Daily,
Everyday and Weekly, AUTO RETURN will not operate.
1
Press VCR, then MENU.
2
Press K or L repeatedly to point to SET UP, then press B.
3
Press K or L to point to AUTO RETURN, then press B.
ON will appear next to AUTO RETURN.
4
Press MENU.
Watch the Recorded TIMER PROGRAMME
Press OPERATE to turn on the VCR/DVD, then press PLAY.
VPS (Video Programme System) /
PDC (Programme Delivery Control)
The Video Programme System (VPS) or the Programme
Delivery Control (PDC) is a very convenient system which
assures that the TV programmes you have programmed for
timer recording, will be recorded exactly from beginning to end,
even if the actual broadcasting time differs from the scheduled
time due to delayed start or extension of the programme dura-
tion. Also, if a programme is interrupted and, for example, some
special news is broadcast, the recording will also be interrupted
automatically and resumed when the programme continues.
When the VPS/PDC signal drop out because the broadcast sig-
nal is weak, or when a broadcasting station does not transmit a
regular VPS/PDC signal, the timer recording will be performed
V
button.
HOW
IEW
V
button.
HOW
IEW
V
button.
IEW
HOW
V
number and press
HOW
IEW
V
HOW
in the normal mode (without VPS/PDC) even if it was pro-
grammed for VPS/PDC. When the starting time of the VPS/PDC
timer recording is from 0:00 to 3:59 on a given day, the
VPS/PDC function operates from 20:00 on the previous day to
4:00 on the following day. When the starting time of the
VPS/PDC timer recording is from 4:00 to 23:59 on the given
day, the VPS/PDC function operates from 0:00 on the day to
4:00 on the following day. This means that if the relevant pro-
gramme is broadcasted within this period, it will be recorded
correctly. If the timer is not programmed correctly, the incorrect
timer setting stays in effect unless you cancel it. To cancel the
incorrect timer setting, refer to "To Cancel or Check the
Start/End Time" on page 17.
Quick-Find
This function enables you to search and confirm the contents
of the recorded programme(s) using the index mark.
• The tape must be fully rewound.
V
IEW
1
Press VCR, then QUICK-FIND.
To skip to the beginning of next programme
Press QUICK-FIND.
num-
IEW
To view at normal speed
Press PLAY. The Quick-Find is cancelled.
NOTES:
• This function will not operate in the Recording mode.
• When you want to cancel the Quick-Find while in
progress, press STOP.
• When the end of a tape is reached during the Quick-
Find, the tape will automatically rewind to the begin-
ning. After rewinding finishes, the VCR/DVD will eject
the tape.
Index Search
• The index mark will be made automatically when
REC/OTR is pressed. It will also be marked at the starting
point of Timer recording and OTR.
• The index mark is not recorded if STILL/PAUSE is
pressed and released during recording.
• The time gap between index marks on the tape should be
greater than 1 minute for SP recording and 2 minutes for
LP recording.
1
Press VCR, then SEARCH MODE.
2
Press K or L repeatedly until the number of pro-
grammes that you want to skip appears.
3
Press s or B.
The VCR/DVD begins rewinding or fast forwarding to the
beginning of desired programme.
• When the preset programme is reached, the VCR/DVD
will start playback automatically.
NOTES:
• Index Search can be set up to 20.
• This function will not operate in the Recording mode.
• Operations must be followed up within 30 seconds,
from steps
mode will be cancelled.
• To exit the Index Search mode, press MENU in step
. Or press STOP after step
2
– 18 –
to
. Otherwise the Index Search
2
3
.
3
EN
Advertisement
Table of Contents
