Table of Contents
Advertisement
VCR OPERATION
Time Search
If a tape includes both programmes recorded in the PAL sys-
tem and ones recorded in the NTSC system, this function
may not be operated correctly.
1
Press VCR, then SEARCH MODE twice.
2
Press K or L repeatedly until the desired time appears.
3
Press s or B.
The VCR/DVD begins rewinding or fast forwarding to the
specified point.
When 0:00 is reached, the VCR/DVD will start playback auto-
matically.
NOTES:
• Time Search can be set up to 9 hours 59 minutes
(9:59).
• This function will not operate in the Recording mode.
• Operations must be followed up within 30 seconds,
from steps
2
to
3
will be cancelled.
• To exit the Time Search mode, press MENU in step
Or press STOP after step
Recording from DVD to VCR
1
To activate DVD function, press DVD.
2
Insert a non-copyright-protection DVD, then press PAUSE
at the point where you want to start recording.
3
Press VCR, then insert a tape with its erase-prevention
tab in place. Make sure the VCR function is in Stop mode
after you find your recording point.
4
Press TAPE SPEED to choose your recording speed.
SP or LP appears on the front panel display.
5
Press 0, 0, 4, with the numerical buttons, then "disc"
briefly appears on the front panel display.
6
Press REC/OTR.
• The recording of the DVD's paused image selected at
2
step
starts.
7
Press DVD, then press PLAY.
• The recording of the DVD's moving image starts.
8
To stop recording, press VCR, then STOP.
Copying a Video Tape
You can make copies of videotapes made by friends or rela-
tives for your own enjoyment.
WARNING: Unauthorised recordings of copyrighted
video tapes may be an infringement of copyright laws.
Connect the recording VCR/DVD (this unit), playing VCR
(another VCR) and your TV as outline in the following dia-
gram.
[Source (Playing) VCR <Monaural>]
(another VCR)
to 21-Pin
scart terminal
DVD
DIGITAL
ANALOG
S-VIDEO
AUDIO OUT
AUDIO OUT
OUT
L
R
[Editing (Recording) VCR/DVD]
1
Insert a pre-recorded tape into the playing VCR.
2
Insert a tape with its erase prevention tab in place into
the cassette compartment of the recording VCR/DVD.
. Otherwise the Time Search mode
3
.
[TV set]
(Use for monitoring)
to aerial
jack
AER I AL
VCR
AV2 (DECODER)
R F O UT
DVD/VCR
AV1 (TV)
to RF OUT
(
)
3
Press TAPE SPEED to select the desired recording
speed (SP/LP).
4
Select "AV2" position on the recording VCR/DVD.
5
Press REC/OTR on the recording VCR/DVD.
6
Begin playback of the tape in the playback VCR.
7
To stop recording, press STOP/EJECT on the recording
VCR/DVD, then stop playback of the tape in the playing
VCR.
NOTES:
• For best results during dubbing, use the VCR/DVD's
front panel controls whenever possible. The remote
control might affect the playback VCR's operation.
• If video or colour fades in and out, you may be copying
a copy guarded video tape.
• Unauthorised recording of copyrighted materials may
infringe on the rights of copyright owners, violate copy-
right laws and may not record clearly.
To monitor the recording
2
.
Turn on the TV and select the video channel on the TV.
Status Display
• To check the Counter, or Clock & Channel number,
press DISPLAY. Each time you press DISPLAY, TV screen
will change as illustrated:
When you select the channel using the numerical
buttons, select the desired channel (position number).
<OFF mode>
NOTE: If the display shows an abnormal reading or no read-
ing, press RESET button on the bottom of the
VCR/DVD.
Video Cassette Tape
This VCR/DVD will operate with any cassette that bears the
VHS mark. For best results, we recommend the use of high-
quality tapes. Do not use poor quality or
damaged tapes.
• You can prevent accidental erasing of
a recording by breaking off the erase-
prevention tab on the back edge of the
cassette.
• If you decide to record on the tape
again, cover the hole with plastic tape.
Before recording, select the tape speed : SP mode (Standard
Play) or LP mode (Long Play).
The table below shows the maximum recording/playback
Round
time using E-60, E-120, E-180 or E-240 tapes in each mode.
coaxial cable
(supplied)
T
YPE OF TAPE
T
APE
E-60
E-120
E-180
E-240
– 19 –
<COUNTER mode>
■
SP
Press once.
Press once.
0:12:34
Press once.
Two Different Tape Speeds
R
/P
ECORDING
LAYBACK
S
SP M
PEED
ODE
1
HOUR
2
HOURS
3
HOURS
4
HOURS
<CLOCK and CHANNEL
NUMBER mode>
■
17:40
SP
P02
Tab
T
IME
LP M
ODE
2
HOURS
4
HOURS
6
HOURS
8
HOURS
EN
Advertisement
Table of Contents
