NEC Express5800/320Fd-LR User Manual page 97

7.
Confirm that synchronizing disks are started and the DISK ACCESS LEDs and the
display of RDR utility change as shown below:
Synchronizing
Source disk
Destination disk
RDR Virtual Disk
IMPORTANT:
The time required for synchronization varies depending on the partition size on the disk.
For 18GB partition, it takes about 20 minutes.
If there is no partition, synchronization may complete in a short period and the disk may
become synchronized after RDR is set.
If the system is rebooted during synchronization, the process cannot be completed. Do
not restart the system until the synchronization is completed.
DISK ACCESS
LED
Amber
(Blinking)
Amber
(Blinking)
Windows Setup and Operation 3-9
RDR Utility
Op State: State
Simplex
Syncing
Simplex
Status
Resync x percent
(x=0, 4, 8, ..., 96)