NEC Express5800/320Fd-LR User Manual page 399

Follow the guideline shown at the bottom of the screen, and press the Esc key.
7.
The [Enduser Menu] below is displayed.
<Test Result>
Shows the diagnostics completion screen of the above diagnostics.
<Device List>
Shows a list of connected devices.
<Log Info>
Shows the log information of the diagnostics. It can be saved on a floppy disk. To save it
on a floppy disk, insert a formatted floppy disk to the floppy disk drive, and select
<Save(F)>.
<Option>
Optional features can be used from this menu.
<Reboot>
Reboots the system.
Select <Reboot> in the [Enduser Menu] above.
8.
The server restarts and the system is started from the NEC EXPRESSBUILDER.
Exit the NEC EXPRESSBUILDER, and remove the DVD from the DVD-ROM drive.
9.
Power off the server and unplug the power cord from the receptacle.
10.
Reconnect all the LAN cables that have been disconnected in Step 2 to the server.
11.
Plug the power cord.
12.
This completes the system diagnostics.
Maintenance 6-9