Table of Contents
Advertisement
Gray Balance
You can specify the default gray balance level within the range of -2 to +2.
NOTE:
•
This option is effective only for black and white copying.
1
Press the
(System) button.
2
Select Defaults Settings, and then press the
3
Select Copy Defaults, and then press the
4
Select Gray Balance, and then press the
5
Select the desired value, and then press the
209
Copying
button.
button.
button.
button.
Advertisement
Table of Contents
Need help?
Do you have a question about the DocuPrint CM205 f and is the answer not in the manual?
Questions and answers
black toner to light
To fix a light black toner issue on the Fuji Xerox DocuPrint CM205 f, follow these steps:
1. Check Toner Levels:
- Open the Printer Status window in SimpleMonitor.
- Check the toner level in the Consumables tab.
- Replace the black toner cartridge if low or empty.
2. Verify Print Media:
- Ensure the paper is dry and suitable for the printer.
- Use the recommended print media.
3. Adjust Paper Type Setting:
- Open Printing Preferences in the print driver.
- Go to the Paper/Output tab.
- Change the Paper Type setting.
4. Disable Toner Saving Mode:
- Open Printing Preferences in the print driver.
- Go to the Graphics tab.
- Ensure the Toner Saving Mode checkbox is not selected.
If the issue persists after these steps, contact a Fuji Xerox local representative.
This answer is automatically generated