Table of Contents
Advertisement
DAILY OPERATION
Switching Receiver ON/OFF
Press the ON/OFF button to turn on the digital receiver after it has been plugged into the main
power supply.
• To wake up the receiver press the remote controller
• To put the digital receiver on standby again, press the remote controller
Changing Channels
With the digital receiver channels can be selected in three ways: using the channel list, using the
number buttons, and using the P +/- buttons. After a selection has been made using any of these
methods the receiver will wait about one second before changing the channel.
Using the Number Buttons
The number buttons can be used to enter a channel number up to three digits long. To enter a
channel number press the corresponding number buttons one after the other.
IMPORTANT:
The number buttons can be used to select any channel, not just the channels
that have been selected as favourites.
22
<BRB1056>
button.
3
<Channel number input screen>
button.
Advertisement
Table of Contents
