Test Print - Sharp AR-C260P Key Operator's Manual

DESCRIPTION OF PROGRAMS

Test Print

This program is used to determine whether "Colour
Balance" or "Easy
performed on the machine. (see page 13)
Follow these steps to print a test page from the
operation panel.
Display "TEST PRINT" as indicated in the chart
1
on page 29.
TEST PRINT
Load A4 or letter-size paper in the tray and press
2
the [OK] key.
When the [OK] key is pressed, "PRINTING." appears
in the display. After a brief interval, a colour test page
will be printed (see below).
[Test Page (printed by printer)]
Color Balance Adjustment Level
Low Density Mid Density
C M Y Bk C M
Easy Calibration Adjustment Level
Low Density Mid Density
The top line of the test page shows the four colours
(C (cyan), M (magenta), Y (yellow), and Bk (black))
at low density, mid density, and high density. The
bottom line shows processed grey* at low density,
mid density, and high density.
* Processed grey is the colour obtained when the
cyan, magenta, and yellow colours on the top line
are combined together.
14
Calibration" should be
High Density
Y Bk C M Y Bk
High Density