Camera - Panasonic AG-RCP30P Operating Instructions Manual

Administrator Setup
Time
Use this function to turn date
and time display on or off during
recording.
Setting : ON/OFF
Note:
The Detailed On-Screen Display
(see pages 22 and 28) will hide this
indication.

Camera

Zoom Limit
Use this function to enter maximum
zoom ratio.
Setting : ×22/×220
AGC Level
Use this function to set the level of
camera input gain control.
Setting : LOW/MID/HIGH/OFF
Init Backlight
Use this function to turn backlight
compensation on or off when the
power is on.
Setting : ON/OFF/LAST
Init AE Shift
U s e t h i s f u n c t i o n t o a d j u s t
brightness when the power is on.
Setting : -2/-1/0/+1/+2/LAST
Flip
Use this function to determine
whether to vertically flip camera
video image or not.
Setting : ON/OFF
∗1 Applies the setting in effect when power was last turned off. Unless power is
turned off properly, the operating state may not be saved correctly.
∗2 Automatically switches between ON and OFF.
(continued)
AutoZoom Magnification
Init IR Mode
∗
1
∗
1
Use this function to set the target
zoom-in ratio.
Setting : ×1/×2/×3/×4/×5/×7/×10/
×15/×22
AutoZoom Time
Use this function to set the zoom-in
pause time.
Setting (sec.) : 3/5/8
Init Camera LED
Use this function to turn the camera
lamp on or off when the power is on.
Setting : ON/OFF/LAST
Use this function to set the IR
function when the power is on.
∗
Setting : AUTO /OFF/ON/LAST
2
IR Level
Use this function to set the IR
function level during automatic
switching.
Setting : LOW/HIGH
IR Time
Use this function to set the IR
function detection time during
automatic switching.
Setting (sec.) : 10/30/60/300
∗
1
∗
1
37