Recording; Starting And Stopping Recording - Panasonic AG-RCP30P Operating Instructions Manual

P2 remote control panel, car use only
Hide thumbs Also See for AG-RCP30P:
Table of Contents

Advertisement

Recording

Starting and stopping recording

Starting recording
Press the [REC] button.
This starts video and sound recording.
The live screen appears automatically if
not already on. The Memory Card Video
Recorder, the Color Camera and this
unit [REC] lamps go on during recording.
Note:
The Color Camera [REC] lamp goes
on regardless of camera input setting
(for example, "CAMERA2" being
selected with the [CAMERA SELECT]
button).
The following methods also enable
start of recording. But these methods
require administrator setup.
• When the GPIO recording trigger
criteria is met.
• When set speed for own vehicle or
target vehicle is exceeded.
• When the vehicle ignition switch is
set to ON and power ON recording
has been set to "ON".
• When the start time of programmed
recording
1
is reached.
Stopping recording
Press the [STOP] button ( ).
Pressing the [STOP] button turns off
the [REC] lamp and video and sound
recordings stop when the post record
interval has elapsed. Then the [BUSY]
lamp goes off.
Recording stops also under the
following conditions.
• There is no more space left on the
P2 card.
∗1 For details, refer to "Starting and Stopping Recording → Programmed recording"
in the Operating Instructions of the Memory Card Video Recorder.
∗2 Post record is a function that continues recording for a preset interval after
recording is turned off. Changing the setting requires administrator setup.
• When the P2 card slots cover on the
Memory Card Video Recorder is open.
• When an administrator setup is started.
• When the GPIO trigger level criteria
is met (requires administrator setup).
• When the Rec Continue Time has
elapsed (requires administrator setup).
• When a defect is detected on a P2 card.
• When the stop time of programmed
recording
1
Adding bookmarks
A bookmark can be added to a file
that is being recorded to mark it for
playback. (see page 26.)
Press the [BOOK MARK] button.
The bookmark icon [
or 2 seconds.
Notes:
• The bookmark icon appears on the
On-Screen Display. When the On-
Screen Display is not displayed, it
appears on the LCD panel.
• Bookmarks can be added with a
minimum interval of 2 seconds.
• A bookmark cannot be entered
until about five seconds after
recording starts.
• It is possible to move the playback
location to the bookmark during
playback.
• Bookmarks can be added also
during playback. (see page 26.)
• Bookmarks can be deleted only
2
during playback. (see page 26.)
is reached.
] appears for 1
23

Advertisement

Table of Contents
loading

Table of Contents