Table of Contents
Advertisement
Administrator Setup
Rec Tally Out
Enables or disables output of the
recording status as the GPIO9
signal. When enabled, a high level
(output voltage 5.0 V) indicates
recording is in progress.
Setting : ENABLE/DISABLE
Init On Screen Type
Use this function to set On-Screen
Display used when the power is on.
Setting : SIMPLE/DETAILS/
∗
LAST
Init Audio Out (Play)
Use this function to set Audio Out
used when the power is on.
OFF
: Audio1 and Audio2 are not
output.
1
: Audio1 is output
2
: Audio2 is output
BOTH : Both Audio1 and Audio2 are
output.
LAST : See footnote.
Skip Target
Use this function to set the skip
location (the amount of time that is
skipped) when the [Skip back] or [Skip
forward] button is pressed.
Trigger / Marker
Playback jumps to the trigger
position (one per file) at which
recording began, or to a bookmark
position, whichever found earlier.
However, no trigger position can
exist in automatically divided files.
Setting : YES/NO
∗1 Applies the setting in effect when power was last turned off. Unless power is
turned off properly, the operating state may not be saved correctly.
∗2 The <Duration> field indicates the time period from start time to stop time.
34
(continued)
1
/OFF
∗
1
Head of File
Use this function to move to the
beginning of a file during playback.
Setting : YES/NO
Notes:
• When both [Trigger/Marker] and
[Head of File] are set to "YES",
playback will restart from the first
trigger or bookmark that appears
or restarts from the beginning of
the file.
• [Trigger/Marker] and [Head of File]
cannot both be set to "NO".
Programed Rec
Use this function to set recording to start
and stop every day or on a specified
day of the week.
∗
Daily
2
Makes daily recordings from the set
start time to the set stop time.
ON : Start time and stop time can be set.
– : No setting is available.
Note:
When [Daily] is set to "ON", the
[Mon] to [Sun] field changes to "–"
and no setting can be made.
∗
Mon to Sun
2
Makes recordings from the set
start time to the set stop time on a
specified day of the week.
ON : Start time and stop time can be set.
A time for the next day can be set.
– : No setting is available.
Advertisement
Chapters
Table of Contents
