Anti-Static Measures - NEC Express5800 series User Manual

ANTI-STATIC MEASURES

The Storage and I/O Blade contains electronic components sensitive to static electricity. Avoid
failures caused by static electricity when installing or removing any optional devices.
Wear a wrist strap (an arm belt or anti-static glove).
Wear a wrist strap on your wrist. If no wrist strap is available, touch an unpainted metal
part of the cabinet before touching a component to discharge static electricity from your
body.
Touch a metal part regularly when working with components to discharge static
electricity.
Select a suitable work space.
– Work with the Storage and I/O Blade on the anti-static or concrete floor.
– When you work with the Storage and I/O Blade on a carpet where static electricity is
likely to be generated, make sure take anti-static measures beforehand.
Use a work table.
Place the Storage and I/O Blade on an anti-static mat to work with it.
Cloth
– Do not wear a wool or synthetic cloth to work with the Storage and I/O Blade.
– Wear anti-static shoes to work with the Storage and I/O Blade.
– Take off any jewels (a ring, bracelet, or wrist watch) before working with the Storage
and I/O Blade.
Handling of components
– Keep any component in an anti-static bag until you actually install it to the Storage and
I/O Blade.
– Hold a component by its edge to avoid touching any terminals or parts.
– To store or carry any component, place it in an anti-static bag.
Upgrading Your Storage and I/O Blade
9-3