Error Messages; Post Error Messages; Messages Displayed By Raid Controller During Post - NEC Express5800 series User Manual

Express5800 series storage and i/o blade ad106a
Hide thumbs Also See for Express5800 series:
Table of Contents

Advertisement

ERROR MESSAGES

If an error occurs in the Storage and I/O Blade, an error message appears on the display unit.

POST Error Messages

Powering on the CPU blade automatically starts the self-diagnostic program, POST (Power On Self-
Test). When the POST detects any error, it displays an error message and its measure on the display
unit.
Refer to the User's Guide of your CPU blade for POST error messages.

Messages displayed by RAID Controller during POST

On-screen message
Memory/battery problems were detected.
The adapter has recovered, but cached data was
lost.
Press any key to continue, or 'C' to load the
configuration utility.
Firmware version inconsistency was detected.
The adapter has recovered, but cached data was
lost.
Press any key to continue, or 'C' to load the
configuration utility.
Foreign configuration(s) found on adapter
Press any key to continue, or 'C' to load the
configuration utility.
Previous configuration cleared or missing
Importing configuration created on
MM/DD hh:mm
Press any key to continue, or 'C' to load the
configuration utility.
An enclosure was found that contains both SAS and
SATA drives, but this controller does not allow mixed
drive types in a single enclosure. Please correct the
problem then restart your system.
Press any key to continue, or 'C' to load the
configuration utility.
SAS drives were detected, but this controller does
not support SAS drives.
Please remove the SAS drives then restart your
system.
Press any key to continue, or 'C' to load the
configuration utility.
Troubleshooting 8-3
Action
Contact your service representative.
Contact your service representative.
Press C to run the utility to import or clear
configuration.
Contact your service representative.
RAID Controller may be faulty. Contact your
service representative to replace the RAID
Controller.
RAID Controller may be faulty. Contact your
service representative to replace the RAID
Controller.

Advertisement

Table of Contents
loading

This manual is also suitable for:

N8404-001f

Table of Contents