Restarting The Upgrade Side - NEC Express5800/320Ma User Manual

Splitting the System
Other Installation Packages
If you previously downloaded individual installation packages to a system disk, open
the Upgrade Side folder that contains the installation packages. Run each installation
program, one at a time.
Some installation programs might require you to restart the operating system on the
Upgrade Side. You can allow these installation programs to restart the Upgrade Side
automatically, or you can manually restart later. You can restart the Upgrade Side as
many times as necessary to complete the installation; however, you might want to
avoid restarting until you have run additional installation programs to reduce the total
number of times you need to restart.
See "Restarting the Upgrade Side" on page 4-12
the Upgrade Side after you restart it.
Related Topics
•
"Software Upgrade Support" on page 2-1
•
"Managing Upgrade Tasks on the Upgrade Side" on page 4-5
•
"Viewing Active Upgrade Process Status" on page 4-21
•
"Merging the System" on page 4-15
•
"Aborting the Upgrade" on page 4-19
•
Troubleshooting

Restarting the Upgrade Side

When the system is running in split mode, if necessary, you can restart the operating
system on the Upgrade Side at any time. You can either allow an installation program
to restart the system automatically or you can perform the following procedure to restart
the system manually.
!
4-12 Express5800/320Ma: Active Upgrade™ User's Guide
N O T E
Before installing any software, ensure that you are
working on the Upgrade Side desktop (through a
remote connection). Do not install software on the
Production Side.
C A U T I O N
Before you restart the system, ensure that you are
working on the Upgrade Side desktop (through a
remote connection). Do not restart the Production Side.
for information about reconnecting to