Table of Contents
Advertisement
To configure sharing after the driver is installed:
1. From the Windows NT computer, click Start , select
Settings , then click on Printers to open the Printers
control panel.
2. Click the printer with the right mouse button to open the
shortcut menu.
3. Select Sharing to open the printer driver. The Sharing
tab will be automatically displayed.
4. Select the Shared radio button.
5. Type in a name for the printer into the Share Name text
box.
6.
Click OK.
Installing the Shared Driver into Windows 95/98 Clients
After the Windows NT PostScript printer driver has been
configured for sharing, a Windows 95 and Windows 98 client
can use a network to install the driver from the Windows NT
computer.
To install the shared driver:
1.
From the Windows 95 or Window 98 client, use the
network to navigate to the Windows NT computer.
2.
Click the shared printer driver with the right mouse
button to open the shortcut menu.
3.
Select Install .
4.
Follow the instructions presented by the Install Wizard to
install the driver.
R
NIC
ESETTING THE
Revises page 57 of the User's Guide.
Follow these steps to reset the NIC to its factory default
settings.
1. Press Online .
OFFLINE
2. Press Menu .
MENU - CONTROL
3.
Press Next until
RESET NIC
4.
Press Select, and when the panel displays
press Select again.
appears on the display.
appears on the display.
appears on the display.
PARAMETERS
R
P
EMOTE
RINTING
Revises page 60 of the User's Guide.
Client System Requirements
You must have the following on your computer.
•
A Windows 95/98 or Windows NT operating system.
•
Microsoft Internet Explorer 4.01 SP1 or Microsoft Java
Virtual Machine. Either program can be obtained from
the SuperScript 4400N Home Page or from Microsoft's
web site.
P
A
RINT
GENT
Revises page 61 of the User's Guide.
Start
PrintAgent starts automatically when you try to print or use
the printer property pages. Keeping it running speeds print
time because you won't have to wait for PrintAgent to start
up every time you print. To monitor the printer status,
PrintAgent must be running. To start PrintAgent, press the
Windows Start button, select Programs , and select NEC
PrintAgent System to display PrintAgent commands.
Choose Start . A red planet icon appears in the Windows Tool
Tray in the lower right-hand corner of the screen. If the planet
doesn't turn green after five seconds, PrintAgent did not
launch properly. Restart your computer and try again.
P
P
ULL
RINTING
Revises page 63 of the User's Guide.
This section shows system administrators how to configure a
Pull Printing Server to support print clients.
Server System Requirements
Prior to server installation, the Pull Printing Server must
already have installed
•
A Windows 95/98 operating system.
•
Microsoft Word, Excel, and PowerPoint.
,
•
The web server included on the SuperScript 4400 Series
Installer CD, which is automatically installed when pull/
printing/server is selected under the Administration
installation.
P
M
ROGRAM
ENUS
Resetting the NIC
5
Advertisement
Table of Contents
