Switching Off The Alarm; Cool Pack; Safety Lock; Switching Off For Longer Periods Of Time - Miele KF 7542 SN Operating And Installation Manual

Table of Contents

Advertisement

^ Press the alarm button.
The alarm stops. The bars will continue
flashing in the temperature display until
the temperature which has been set is
reached.
Place the cool pack in the top drawer or
to save space on the freezer tray. The
cool pack will be at its most effective af-
ter it has been in the freezer for approx.
24 hours.
The safety lock can be engaged to pre-
vent the temperature being changed or
the appliance being switched off unin-
tentionally.
^ Press and hold the alarm button.
^ At the same time press the Super
freeze button, and hold both buttons
in for about 3 seconds until the safety
lock indicator light d lights up in the
temperature display and you hear a
beep.
The appliance can now not be switched
off until the lock is de-activated.
12
^ Repeat the same procedure as for
activating the lock given above.
The safety lock indicator light must go
out in the temperature display. The ap-
pliance can now be switched off at any
time.
If the appliance is not going to be used
for a longer period of time, e.g. whilst
on holiday
^ switch the appliance off at the mains,
^ withdraw the plug (pull on the plug
and not the cable),
^ defrost the freezer section,
^ clean the appliance out and
^ leave the doors ajar to air the appli-
ance.
If, during a long absence, the appli-
ance is switched off but not cleaned
out and the doors are left shut there
is a danger of mould and odours
building up inside the appliance.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents