Features - Miele H 4170 Pyrolytic Operating Instructions Manual

Features

Oven controls
In addition to operating the various
cooking programmes to bake, roast
and grill, the electronic controls also
offer the following features:
– Clock display
– Minute minder
– Timer to automatically switch cooking
programmes off, or on and off
– Settings can be customised
Cooling system
As soon as the oven is switched on, a
cooling fan is automatically engaged.
The cooling fan mixes hot air from the
oven cavity with cool room air before
venting it out into the kitchen through
vents located between the appliance
door and the control panel.
The cooling fan will continue to run for a
while after the oven has been switched
off to prevent any humidity building up
in the oven, on the control panel or on
the oven housing unit.
When the temperature in the oven has
fallen sufficiently, the cooling fan will
switch off automatically.
Description of the appliance
Pyrolytic self-cleaning programme
The oven interior can be kept clean by
using the Pyrolytic . cleaning
programme.
This programme heats the oven interior
up to 460 °C. Any residual soiling is
broken down and reduced to ash by
the high temperatures.
For safety reasons the door is locked at
the beginning of the pyrolytic
programme.
Depending on soiling levels you can
choose between two cleaning
programmes:
– PY I lasting approx. 2 hours
– PY 2 lasting approx. 2 hours 30
minutes
Once the set time has elapsed, the
heating elements will switch off
automatically.
For safety reasons the door will remain
locked until the temperature in the oven
cavity has dropped below 280 °C.
See "Cleaning and care" for more
information.
5