Advertisement
– Address the ceiling plate and posi-
tion it exactly. Mark the position of
the four holes to be drilled
curing the plate and the position for
the gap for the mains cable
If the cooker hood is to be con-
nected to an external fan motor, also
mark the position of the gap for this
connection cable
– Lay a mains cable and an exhaust
connection in the ceiling space.
– If the cooker hood is to be con-
nected to an external fan motor, cre-
ate a gap for the connection cable to
the fan motor. Ensure that the
diameter is sufficient to be able to
feed through a 6-pole connector.
20
b
for se-
c
.
d
.
– Drill four 10 mm ø holes in the ceiling
and insert S10 plugs into the holes.
– Prepare the ceiling plate for fitting.
Push up the spring clips
the slots from below. Insert the four
counersunk screws M6 x 20
the recessed holes from above.
– Use the hose clip
haust hose to the ceiling plate.
e
through
f
into
g
to secure the ex-
Advertisement
