Setting The Time Of Day; Whilst Triangle Is Flashing - Miele H 4020 BM Operating Instructions Manual

V
or immediately to make any
changes to the setting selected:
– The increases the value
shown.
– The decreases the value
shown.
Triangle V will flash for approx.
5 seconds.
Settings can only be changed using
the or buttons whilst it is flashing.
If this period has elapsed, you will
need to call up the required symbol
again by pressing the V button.
Each press on the or
the time for the microwave programmes
in one-second steps, and the time for
all other functions in one-minute steps.
Holding the button pressed in for
longer, speeds up the change in the
display.
, use the
button alters
When the appliance is first
connected to the power supply, or
after a power cut, "I2:00" will flash in
the display.
The time of day can only be entered
if the function selector is at "0".
^ Turn the function selector to "0".
l m
V
^ Press the V button repeatedly until
triangle V is underneath the m
symbol.
^ Whilst triangle V is flashing, use the
or button to enter the hour and
confirm by pressing the V button.
The minutes and triangle V will flash.
^ Now enter the minutes with the or
button and confirm by pressing the
V button.
As soon as the m symbol goes out, the
time set is saved.
23