Yamaha DME64N Owner's Manual page 28

Connection
Control from a Computer Having the Same Network Address
Zone
DME64N/24N
(IP Address: 192.168.0.3)
N OT E
The IP addresses in the diagram are examples.
N OT E
Use a switching hub that is compatible with 100Base-TX/10Base-T network speeds.
When using category 5 UTP cable (Unshielded Twisted Pair), the total length of the cables connecting the DME64N/24N to
the hub or control panel unit can be up to 100 meters. Due to differences in cable and switching hub performance, however,
proper operation at the maximum length cannot be guaranteed in some cases. The maximum usable cable length will also be
reduced if joint connectors, cross cable converters, or other extension adaptors are used.
Control from a Computer Having a Different Network Address
DME64N/24N
(IP Address: 192.168.0.3)
28
DME64N/24N Owner's Manual
Zone Master
DME64N/24N
Ethernet Straight Cable
Ethernet Straight Cable
DME64N/24N
(IP Address: 192.168.0.250)
Zone Master
(IP Address: 192.168.0.2)
DME64N/24N
Ethernet Straight Cable
Switching Hub
Ethernet
Ethernet
Straight Cable
Straight Cable
DME64N/24N
(IP Address: 192.168.0.12)
(IP Address: 192.168.0.2)
Ethernet
Straight Cable
Switching Hub
Ethernet
Straight Cable
Zone
Port Settings
• Destination network address: 192.168.0.0
• Subnet mask: 255.255.255.0
• Gateway: 192.168.0.1
Ethernet
Straight Cable
Router
Computer
(IP Address: 192.168.0.100)
Ethernet
Straight Cable
Computer