Table of Contents
Advertisement
BEFORE CALLING FOR SERVICE
Use the troubleshooting chart to resolve problem in operation. If you are unable to resolve
the problem, unplug the power cord and contact your dealer.
Symptom
The power is not turned on.
No image appears on the monitor.
The image is not stored in memory.
Check and Remedy
Is the power cord plug disconnected from the
outlet?
Connect the power cord plug to the outlet fi rmly.
After tuning the power off, wait for approx. 2
minutes. Then turn on the power.
Is the video signal inputted to this unit?
Check the connection. Refer to pages 14-17.
Is the input signal (INPUT : VIDEO, S-VIDEO)
selected on the menu screen correctly?
Check the current setting. Refer to page 33.
Is the image stored in memory displayed on the
monitor screen?
Press the MONITOR button to display the
source image (LIVE).
Are the images being printed with full memorized
memory page?
Press the CLEAR/STOP button on the control
panel after completing printing.
Then, store the image in the memory again.
Is the memory full in the status of PAGE
INCREMENT : OFF or AUTO CLEAR : OFF?
Store the image in the memory after pressing
the CLEAR/STOP button on the control panel.
(According to the setting conditions, the image
can be stored in the memory by setting PAGE
INCREMENT to ON, AUTO CLEAR to ON or
pressing the PRINT button.)
Is the memory full in the status of
MEMORY&STOP : ON?
Press CLEAR/STOP button on the control
panel, and store the image again.
49
Advertisement
Table of Contents
