Table of Contents
Advertisement
SYSTEM SET
REMAINING NOTICE
OFF
ON
REMAINING Q'TY Sets the number of ink ribbon to inform the
RESUME
OFF
ON
REMAINING RESET
MODE1
MODE2
COPY PROGRAM TO
•
When CANCEL is selected after selecting the program
number, the program is not copied even if the ENTER button
is pressed.
INITIALIZE PRG
PRG1
PRG2
PRG3
ALL
•
When CANCEL is selected after selecting the program
number, the program is not initialized even if the ENTER
button is pressed.
SETUP MENU
Sets buzzer, notifi cation of ink ribbon quantity,
etc.
Sets whether the remaining of the ink
ribbon is noticed or not.
This unit does not inform the ink ribbon
remaining.
When the remaining of the ink ribbon reaches
to the value set by the REMAINING Q'TY
menu, this unit informs it.
remaining. The setting range is 1 to 20.
Selects the operation of this unit after
resolving an error occured during printing.
After the error is resolved, this unit gets in the
stand-by status.
After the error is resolved, this units resumes
printing automatically.
S e t s t h e t i m i n g o f r e s e t t i n g t h e
indication of the ink ribbon remaining.
When a ribbon cartridge is loaded, the
indication is reset to the initial value.
When a ribbon cartridge is loaded after the
indication becomes to 00, the indication is
reset to the initial value.
The settings of the currently used program
are copied to other program by selecting
other program and then pressing the ENTER
button.
Initializes the settings. When the ENTER
button is pressed, the initialization starts.
Initializes the settings of the program 1.
Initializes the settings of the program 2.
Initializes the settings of the program 3.
Initializes the settings of all programs.
39
Advertisement
Table of Contents
