Mitsubishi Electric DPSClick User Manual page 74

DPSClick User Manual
4.10 – PRINT MANAGEMENT MODULE:
DPSPrintServer
4.10.1 – Introduction.
The DPSPrintServer module performs the Print out function for the DPSClick, and
frees the latter from managing and sending information through the SCSI bus. This
program must be run to be able to print but, anyway, DPSClick launches it from the
version 3.20, instead of being launched from Windows start. To check that it is enabled
simply click the Windows
appears:
You can access the DPSPrintServer module via the Windows
clicking the button located in the bottom left hand corner of the 'Browser', 'Multiprint' and
'Photo ID' screen of DPSClick, or else from the main screen.
4.10.2 – Checking Printer status.
Double–click on the DPSPrintServer icon to call up the program's control screen:
What we can see now is the list of jobs and pictures sent to the printer and the status of each
one of them.
74
TM
(Task Bar) button and make sure that the following icon
This button alternates between activated and deactivated by clicking it.
The button displays the status you will move to on clicking it.
TM
tool bar icon or
v. 4.0