Page 1
CR9916 2 Band Dual Alarm CD Clock Radio Down/ Play/ Repeat CD mode Stop B.skip F.skip Pause Power FM St Memory Repeat Random Sleep Snooze Power Sleep Memory CD Display Time Set Please read this manual before use...
Page 2
Controls Down/ Play/ Repeat CD mode Stop B.skip F.skip Pause Sleep Power FM St Memory Repeat Random Snooze Power Sleep Memory CD Display Time Set 1. CD stop button 6. CD play/pause button 11.Memory button 16. Alarm 1 indicator 2. Track down/minute up button 7.
Page 3
Controls Tuning Music FMSt. Buzz 24. Tuning control 20. Alarm 1 function switch 21. Alarm 2 function switch 25. Function switch 22. Alarm mode switch 26. Volume control 23. Headphone socket 27. Battery compartment (on underside) If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri)
Switching on and setting the time Before using your CD clock radio you must first set the correct time. 1. Place the unit on a flat surface. Plug the mains lead into a wall socket and switch on. 2. The clock display will show 12:00. Ensure that the Alarm 1 and Alarm 2 function switches are set to the 'Off' position.
Listening to the Radio 1. Switch on your CD clock radio by pressing the Power button. The Power indicator LED will light. Power 2. Slide the Function switch to the required waveband. FMSt. 3. Tune in to the desired station by rotating the Tuning control. The station frequency is indicated in the dial scale.
Compact discs Use only Digital Audio CDs which have the symbol. Never write on a CD or attach any sticker to the CD. Always hold the CD at the edge and store it in its box after use with the label facing up. To remove dust and dirt, breathe on the CD and wipe it with a soft, lint-free cloth in a straight line from the centre towards the edge.
Playing a CD Play/ Pause 1. Press the Play/Pause button to start playback. The display will show the track number. After a short time the display will revert to showing time. 2. Set the Volume control to the required setting. 3.
CD repeat mode Repeat 1. Whilst the CD is playing press the Repeat button once to repeat the Repeat CD mode current track. The Repeat indicator will flash. 2. Press the Repeat button again to repeat all tracks on the CD. The Repeat indicator will light up.
Programmed play By programming the player you can play up to 20 tracks in any desired order. Memory 1. Whilst the CD is in STOP mode, press the Memory button. The display will show ‘ P 01’. Down/ B.skip F.skip 2.
Setting alarm times The alarms can be set to wake you by a buzzer, CD or the radio. Your CD clock radio has 2 separate alarms which can be set to activate at different times. Setting alarm 1 1. Slide the Alarm 1 function switch to the 'Adj' position. Down/ 2.
Checking the Alarm Times 1. To check alarm 1 time, set the Alarm 1 function switch to the 'Adj' position. Alarm 1 time will flash in the display. 2. Return the Alarm 1 function switch to the 'Off' position. The display will revert to showing time.
Setting the alarms to wake to radio Music 1. Set the alarm time as previously described. Set the Alarm function switch to the 'Music' position. Set the Alarm 1 or Alarm 2 selector Buzz switch to the 'On' position. The corresponding Alarm indicator will light.
Setting the alarm to wake to CD programme 1. Set the alarm to wake to CD as described above. 2. Programme your favourite tracks as described earlier Play/ 3. Press the Play button followed by the Stop button. Stop Pause 4.
Page 14
IF IN DOUBT - CONSULT A QUALIFIED ELECTRICIAN. Mains supply Back-up Battery (not necessary for the unit to function) The CR9916 will operate from a supply of AC 230volts, 50Hz only. Slide the battery cover catch in the direction of the arrow. Open the battery cover.
Caution: Using any equipment or devices other than those described and specified in these operating instructions, or tampering with the unit in any way, can result in dangerous exposure to radiation. ROBERTS RADIO LIMITED PO BOX 130 MEXBOROUGH SOUTH YORKSHIRE S64 8YT The Company reserves the right to amend the specification without notice.
Page 16
In the event that it is not possible to return the instrument to the Roberts' dealer from whom it was purchased, please contact Roberts Radio Technical Services department at the address shown below before taking further action.
Need help?
Do you have a question about the CR9916 and is the answer not in the manual?
Questions and answers