Roberts CR9986 User Manual

Dual alarm cd clock radio

Hide thumbs Also See for CR9986:

Catalog (8 pages)

Manual (24 pages)

Table Of Contents

Table of Contents

Quick Links

Need help?

Do you have a question about the CR9986 and is the answer not in the manual?

Questions and answers

Teng Chang

April 6, 2025

the cd player not working. it says 'no. in display

1 comments:

Mr. Anderson

April 6, 2025

The Roberts CR9986 CD player may display 'no' because it cannot read the CD. Common reasons include:

1. The CD is not placed correctly on the spindle.
2. The CD is dirty or damaged.
3. The CD is a CD-R/CD-RW that is not finalized or not recorded properly.
4. The CD format is not compatible (must be CD-DA format audio disc).

Ensuring the CD is clean, correctly inserted, and properly finalized can help resolve the issue.

This answer is automatically generated

Summary of Contents for Roberts CR9986

Page 1 CR9986 Dual Alarm CD Clock Radio Please read this manual before use...
Page 2: Table Of Contents
Contents Contents ... 1 Controls ... 2-3 Switching on and setting the time ... 4 Listening to the radio ... 5 Compact discs ... 6 CD-R/CD-RW discs ... 6 Inserting a CD ... 7 Playing a CD ... 8 Selecting a track ... 9 Search function ...
Page 3: Controls
Controls 1. On/Off button 6. Sleep indicator 2. Dial scale with pointer 7. Time Set button 8. CD Display button 3. Alarm 1 indicator 4. Auto Dimmer 9. FM stereo indicator 5. PM indicator 10. Snooze button 10 11 12 13 11.
Page 4: Controls
Controls 25. Alarm 1 function switch 26. Alarm 2 function switch 27. Alarm Mode switch 28. Headphone socket 29. CD Door handle 30. Tuning control 31. Function switch 32. Volume control 33. Battery compartment (on underside)
Page 5: Switching On And Setting The Time
Switching on and setting the time Before using your CD clock radio you must first set the correct time. 1. Place the unit on a flat surface. Plug the mains lead into a wall socket and switch on the wall socket.
Page 6: Listening To The Radio
3. Tune in to the desired station by rotating the Tuning control. The station frequency is indicated in the dial scale. The Wire aerial located on the rear of your CD clock radio is for FM reception. The wire should be fully extended and positioned for optimum reception.
Page 7: Compact Discs
Your CD clock radio can playback CD-DA format audio CD-R/CD-RW discs that have been finalised* upon completion of recording. Your CD clock radio may fail to playback some CD-R/CD-RW discs due to poor recording of the CD-R/CD-RW disc. *Finalising enables a CD-R/CD-RW disc to playback on audio CD players such as your CD clock radio.
Page 8: Inserting A Cd
Inserting a CD 1. Press the On/Off button to switch on your CD clock radio. The On indicator will light. 2. Set the Function switch to CD. 3. To open the CD compartment, lift the CD door by the handle as shown.
Page 9: Playing A Cd
Playing a CD 1. Press the Play/Pause button to start playback. The display will show the track number. After a short time the display will revert to showing time. 2. Set the Volume control to the required setting. 3. To display the CD track number press the CD display button. 4.
Page 10: Selecting A Track
Selecting a track 1. Whilst the CD is playing, press either the F.skip or B.skip buttons to change to the desired track, the track number will show in the display. You can also skip tracks when the player is in stop mode. Skip to the desired track using the F.skip or B.skip buttons.
Page 11: Cd Repeat Mode
CD repeat mode 1. Whilst the CD is playing press the Repeat button once to repeat the current track. The Repeat indicator will flash. 2. Press the Repeat button again to repeat all tracks on the CD. The Repeat indicator will light up. 3.
Page 12: Programmed Play
Programmed play By programming the player you can play up to 20 tracks in any desired order. 1. Whilst the CD is in Stop mode, press the Program button. The display will show ‘ P 01’ and the Program indicator will flash. Note: the display will revert to showing time after 10 seconds of inactivity.
Page 13: Setting Alarm Times
Setting alarm times The alarms can be set to wake you by a buzzer, CD or the radio. Your CD clock radio has 2 separate alarms which can be set to activate at different times. Setting Alarm 1 1. Slide the Alarm 1 function switch to the 'Adj' position.
Page 14: Checking The Alarm Times
Checking the Alarm Times 1. To check Alarm 1 time, set the Alarm 1 function switch to the 'Adj' position. Alarm 1 time will flash in the display. 2. Return the Alarm 1 function switch to the 'Off' position. The display will revert to showing time.
Page 15: Setting Alarms To Wake To Buzzer
2. Set the Alarm 1 or Alarm 2 function switch to the 'On' position. The corresponding Alarm indicator will light. 3. Press the On/Off button to switch off your CD clock radio, the On indicator will switch off. 4. The buzzer alarm will sound every day at the preset time for 90 minutes.
Page 16: Setting The Alarms To Wake To Radio
4. Set the Volume control to the desired level. 5. Press the On/Off button to switch off your CD clock radio, the On indicator will switch off. 6. The radio alarm will sound every day at the preset time for 90 minutes.
Page 17: Setting Alarms To Wake To Cd
3. Set the Function switch to the 'CD' position, insert a CD and ensure that the Volume control is set to the desired level. 4. Press the On/Off button to switch off your CD clock radio, the On indicator will switch off.
Page 18: Setting Alarms To Wake To Cd Programme
2. Programme your favourite tracks as described earlier. 3. Press the Play/Pause button followed by the CD Stop button. 4. Press the On/Off button to switch off your CD clock radio, the On indicator will switch off. Important: Failure to switch off the unit will result in non operation of the alarm.
Page 19: Snooze Control
Snooze control 1. The buzzer, CD or radio alarm can be silenced for 6 minutes by pressing the Snooze button. This sequence can be repeated during the 90 minute alarm period. Sleep timer 1. CD or radio playback can be set to switch off automatically after a preset time has elapsed.
Page 20: Auto Dimmer
Auto Dimmer 1. The Auto Dimmer located on the left side of the LED Display will automatically adjust the intensity of the clock display to suit room brightness. Headphones 1. A Headphone Socket (3.5mm) located on left side of the unit is provided for use with either headphones or an earpiece.
Page 21: Specifications
Specifications Power Requirements Mains AC 230 volts, 50Hz Back-up Battery IEC size 6LR61 (6F22, PP3) Frequency Coverage 87.5 - 108MHz 515 - 1630kHz 142 - 292kHz Warning CLASS 1 LASER PRODUCT means that the laser's construction makes it inherently safe so that the legally prescribed maximum permissible radiation values can never be exceeded Caution: Using any equipment or devices other than those described and specified in these operating instructions, or tampering with the unit...
Page 22: General
MW/LW bands. Mains supply The CR9986 will operate from a supply of AC 230volts, 50Hz For your convenience this product is supplied with a plug which is fitted with a fuse of the appropriate rating. If the plug supplied is not suitable for your socket outlet, it should be removed by unscrewing the plug top, the terminal screws and removing the cable.
Page 23: Guarantee
In the event that it is not possible to return the instrument to the Roberts' dealer from whom it was purchased, please contact Roberts Radio Technical Services department at the address shown on the rear of this manual before taking further action.
Page 24 ROBERTS RADIO TECHNICAL SERVICES 97-99 Worton Road Isleworth Middlesex TW7 6EG Technical Helpline:- 020 8758 0338 (Mon-Fri) Issue 1...