Fader; Meters-Fader Popup - Euphonix Max Air Operation Manual

Euphonix Max Air Mixing Console Operation Manual
4.10.3

Fader

Select the Fader tab to display the Meters-Fader View. This configures the meter dis-
play next to the fader (Figure 4-41).
Select a Strip button from the Strips section. Use the Main or Center tabs and the Se-
lect All, Select None, Select Range to assist your selection (page 75). Touch a Meter
Display button to configure the selected Strip.
• Fader: The Main or Swap channel is displayed, depending upon the state of the
strip's Swap button. When the Swap button is pressed to change from the Main
to Swap channel, the meter follows this change.
• Fader with Gain Reduction: The Main or Swap channel is displayed with
gain reduction.
• Main and Swap: The Main and Swap channels are always displayed in the left
and right meters respectively, regardless of whether the Swap button is pressed
or not.
• None: No meter is displayed.
Figure 4-41 Meters-Fader Popup
84
Touchscreen