If Your Computer Does Not Recognize The Net Md; If The Installation Was Not Successful - Sony MZ-S1 Operating Instructions Manual

If your computer does not recognize the Net MD
• Is the Net MD connected correctly to your computer?
if the Net MD is not llrmly connected 1o the computer, the Net MD will not be
recognized by your computer.
Reconnect the dedicated USB cable. If the computer still does not recognize the Nei
MD, disconnect the Net MD, restart the computar, and connect the dedicated USB
cable again.
• Is an MD inserted in the Net MD?
Check if an MD is inserted in the Net MD.
• If your computer does not recognize your Net MD even when the Net MD is
connected end a disc is inserted, the Net MD driver may not be correctly
installed,
Go to the [USB Controller] in the Windows Device Manager window 1o verify th3t your
Net MD is correctly recognized.
A [!] mark in the Device Manager window indicates that your Net MD is not correctly
recognized. Reinstall the Net MD driver.
I Click [Start]-[Settings]-[Control
Panel]. I)
2 Double click [System] in the control panel. 2)
3 Click the [Hardware] 3) tab, and then click [Device Mas_zger].
The Device Manager window appeors.
li In Windows XP, selecl [Start]--[Control Panel].
21 [n Windows XP, double click [System] if the control panel is in the "classic" |brmat, or click
[Performance and Maintenance[ and then [System] if the control panel is in the "category" format.
31 Depending on your system, die [Ilardware] tM_ m_y not be provided. [n this case, click the [Device
Manager] tab to display the Device Manager window.
If the installation was not successful
• Be sure to close all Windows applications before you start the installation.
if you start the installation while other programs are running, a malfunction may occur.
This is especially true fbr programs that require large amounts of system resources, such
as virus-check sol}ware.
• Be sure not to connect the Net MD to your computer before you start the
installation.
ifihe dedicated USB c_ble is connected
to your computer
before the installation, the
installation cannot be done correctly. Connect the dedicated USB cable alter the
installation completed.
• Make sure your computer has enough hard disk drive space.
120MB of free space or more on the hard disk drive is required. If your computer does
not have enough space, the installation may not he possible.
94