Connecting The Net Md To Your Computer - Sony MZ-S1 Operating Instructions Manual

Connecting the Net MD to your computer
After 1he software installation is completed, connect the Net MD |o your computer.
Refer lo the operating instructions of lhe Net MD as well.
1 Insert a recordable disc into the Net MD.
2
Make the power source and the dedicated USB cable connections with the Net
MD and the computer.
AC
power
adaptor
To the USBjacld To the USB
dedicatedjack connecting
terminal
Net MD
_" devices* _t:l_}_:::EZ]::=_
Dedicated
USB cable
_=_/To the DC IN
jack
Computer
* [f a cradle is supplied with your Net MD, connect the dedicated USB cable to the
USB cradle and place the Net MD onto the USB cradle.
3
Check the COnl_ections.
_) When the connections have been properly
j made, "PC÷÷MD"* appears in 1he display of
lhe Net MD.
*Depending on the device, "Net MD" may be
displayed.
Notes
• When using the Nel MD connected to your compuler, it is recommended that you run tile recorder
from an AC oudet. If you use a baltery to run the Nel MD, be sure to use a new dry cell or a t_lly
charged recharge_ble battery. We do not assure the results should there be a mis-operation, check-out
failure, or destmoion of audio data caused by insuf]]eient baltery power.
• When using llle Net MD with the cradle, place the cradle on a stable surface so thai the dedicated USB
cable does not become detached.