Supplied Accessories; Quick Reference - Sharp AQUOS LC-32DV28UT Operation Manual

Supplied accessories
Make sure the following accessories are provided with the product.
¢,
Remote control unit "AA" size battery (x2) AC cord (xl) Stand unit (xl) Operation manual (xl)
(xl) Page 10 Page 9 Page 8
Page 10
J
Always use the AC cord supplied with the TV/DVD.
QUICK REFERENCE
Before attaching (or detaching) the stand, unplug the AC cord from the AC input terminal.
Before performing work spread cushioning over the base area to lay the TV/DVD on. This will prevent it from being damaged.
, Attach the stand in the correct direction.
, Be sure to follow the instructions, incorrect installation of the stand may result in the TV/DVD failing over.
1 Confirm the 8 screws supplied with the TV/DVD.
Short screws (X4) Long screws (X4)
(used in step 2) (used in step 3)
2 Remove the covering sheet of the stand.
(_ Insert the stand into the openings on the bottom of the
TV/DVD.
Insert and tighten the 4 screws into the 4 holes on the
rear of the TV/DVD.
_ Hex key
f f 1T _ Screw
_f_Attach the base to the post.
(_) Attach the base to the 4 screws into the 4 holes on the
bottom of the base.
Hex key--(i
Screw --
Soft cushion
For protection, sheets
are covering the product.
Please remove these
sheets before use.
(Illustration is LC-26DV28UT.)
To detach the stand, perform the step in reverse order.
_-8