Pc Compatibility Chart - Sharp AQUOS LC-32DV28UT Operation Manual

Connecting to E×ternal Equipment
[] When using DVI-HDMI conversion cable (iNPUT 4):
DVI-HDMt conversion cable
Rear of the TV
-I
H_rlrl|
........ _t
AU
;}
O 3.5 mm stereo minijack cable
(Illustration is LC-28DV28UT.)
When using an DVI-HDMt conversion cable, you should make an analog audio connection. In this case, in addition to
connecting an DVI-HDMI conversion cable to the INPUT 4 (HDMI1) terminal, connect an audio cable to the AUDIO PC/
HDMt terminal and set "HDMI1 Audio" to "DVI". (See page 28.)
[] When using analog RGB cable (iNPUT 6):
Analog RGB cable
(D-sub 15pin cable
or VGA cable)
__'--_ mm stereo
minijack cable
Rear of the TV
PC iN
........................................... 7_: : :::::::;!f_!_ .................. _f_ ................................
(Illustration is LC-28DV28UT.
When using an analog RGB cable, input the audio signal to the AUDIO PC/HDMI terminal of INPUT 6.
D sp=ay ng an image fromaPC
To view an image from a PC, perform the following procedure.
(_ Select the Input 8 (PC) mode using iNPUT on the remote control or the TV/DVD set. (See page 15.)
(_) Adjust the "Picture" items if the PC image does not come in clearly. (See page 28.)
PC compatibility chart
PC
720 x 400 31.5 kHz 70 Hz
31.5 kHz 60 Hz O
VGA
640 x 480 37.9 kHz 72 Hz O
37.5 kHz 75 Hz O
35.1 kHz 56 Hz O
37.9 kHz 60 Hz O
SVGA 800 x 600
48.1 kHz 72 Hz O
46.9 kHz 75 Hz O
48.4 kHz 60 Hz O
XGA 1,024 x 768 56.5 kHz 70 Hz O
60.0 kHz 75 Hz O
1,280 x 768 47.8 kHz 60 Hz O
WXGA
1,360 x 768 47.7 kHz 60 Hz O
(_-19