Getting Started - Samsung SilverCare Washer Owner's Manual

Operatin9 Instructions
GETTING STARTED
1. Load yourWasher.
2. Close the door.
3. Add detergent and additives to the dispenser (see pages C6-C7).
4. Select the appropriate cycle and options for the load (see pages C2-C5).
5° Press the Cycle Selector dial.
6° TheWash Indicatorlight will illuminate.
7° The estimated cycle time will appear in the display.
The time may fluctuate to better indicate the time remaining in the cycle.
8. Before your Washer starts to fill, it will make a series of clicking noises to check the door lock and do
a quick drain.
NOT£$:
When the cycle is complete, the Door Lock light wi[[ go out and "End" wi[[ appear in the display.
DO NOT attempt to open the door until the Door Lock light is off.To add a forgotten item, see
"Loadin 9 your Washer" section.
When your Washer is restarted after a pause, expect a delay of up to 15 seconds before the
cycle continues.
Pressing Power cancels the cycle and stops your Washen
The Pre Wash (select models), Wash, Rinse and Spin indicator lights will illuminate during those
portions of the cycle.
SAMSUNG CIothesWasherOwner'slnstructions g-2