Print Size; Pictbrideg - Samsung L700 User Manual

• You can specify the p rint size when printing images stored on the m emory card.
The [Size] menu is availabIe only for D POF 1.1 c ompatible printers.
• Setting the P rint Size
1. S elect the [ Size] menu by pressing the U P
/ DOWN
button and press the RIGHT button.
2. Selecta desired sub menu by pressing the
UP / DOWN button and press the OK button.
[Select] : Selection window for an image to be
changed printed size is displayed.
- Up/ Down / Left / Right : Select an image.
- Zoom W / T Button : Change the printsize.
- OK button : Your changes will be saved and the
menu will disappear.
[All Pics]: Change print sizeof all saved images.
- W / T button :Select a print size
- OK button : Confirm the changed setting.
[Cancel] :Cancel all of the print size settings.
÷ DPOF [Size] secondary menu : Cancel, 3X5, 4X6,
5X7, 8Xl 0
÷ Depending on the manufacturer and printer model,
cancellingthe printing may take a littlelonger for
the printer to process.
• You can use the USB cable to connect this camera to a printer that supports
PictBridge (sold separately) and printthe stored images directly.
Movie clips and voice flies cannot be printed.
• Setting up the camera for connection with the printer
1. In any mode withthe exceptionof Voice Recording
mode, pressthe MENU button.
2. Press the LEFT / RIGHT button and select
[SETUP] menu tab.
3. Select [USB] menu by pressing the UP / DOWN
button and press the RIGHT button.
4. Select [Printer]menu by pressing the UP / DOWN
button and press the OK button.
÷ If you selected [COMPUTER] in Step 5, when you connect the camera to your
printer,the [USB ERROR!] message will displayand the connection will not be
established, tn this case, disconnect the USB cable, and then follow the
procedure from Step 2 onwards.
(49}