GE VG2042 User Manual page 7

STEP 5: Tune the TV
Tune theTV to the VCR viewing channel.The VCR viewing
channel is channel 3 or 4 or theTV's video input.
• If you connect yourVCR using the ANTENNA connectors
with RF antenna cable, set the 3CH.4 switch to channel 3 or
channel 4_the channel you want to use on yourTV.
• If you connect your VCR using the AUDIO/VIDEO jacks with
audio/video cables, select theTV's video input to see the
signal. See the "/'VOwner's Manual.
STEP 6: Turn On the VCR
Press POWER to turn on theVCR.Turning on theVCR for the first
time starts the Interactive Setup feature.
STEP 7: Interactive Setup
The first time the VCR is turned on, Interactive Setup--a brief
series of on-screen menusmappears.These menus assist in
setting up several of theVCR's features. Use the remote's
number buttons to select options.
1. Press 1 for English, 2 for Espafiol (Spanish), or 3 for Fran(;ais
(French).
Select a Language.
Seteccione un idioma.
Choisissez une Langue.
1>English
Z Espafiot
3 Fran_ais
The remaining Interactive Setup menus will appear in the
language you choose. Follow the on-screen instructions to
complete the process.
VCR Viewing Channel
When using the ANTENNA jacks to
connect your VCR, tune your TV to
channel 3 or 4.
When using the audio/video jacks
to connect your VCR, tune yourTV
to theTV's video input channel.
5