Numbers
(0 through
9) Select a channel up to 99 by pressing
two numbers. Select a cable channel over 99 by pressing and
holding 1 until 1 --
appears on the screen.Then press the other
two numbers.
POWER Turns the-IV on and off.
SLOW + and - Used with some'IV menus to select and adjust
features.
VOL Up and Down
Raises and lowers sound of TV.
Playing a Tape
,
.
Tune theTV to yourVCR
viewing
channel
(3, 4, orTV's video input).
Insert a tape in theVCR.
!.
/
\
I
!I
11
If the Auto Play feature is set to ON, the tape automatically
begins playback (if the safety tab on the cassette is
removed).
•
Press FWD or REV to position the tape.
•
Press PLAY (if necessary) to begin tape play.
•
Press PAUSE for stop action.
•
PressTRACKING
up or down to remove any streaks from the
picture, if necessary.
•
Press STOP to stop playback.
Pause
]
If you pause, the VCR automatically
switches from pause to stop after a
few minutes to reduce tape wear.
i
2O