2.
Remove the front panel as described earlier in this chapter.
3.
Position the removable media drive bay in the chassis.
4.
Supporting the bottom of the drive bay, install the two screws securing the drive bay to the top
of the chassis.
Installing the Removable Media Drive Bay
5.
Install the screws securing the drive bay to the front of the chassis.
6.
Connect the power cables (A) and ribbon data cables (B) to the devices installed in the drive
bay.
Install the front cover as described earlier in this chapter.
7.
Install the top cover as described earlier in this chapter.
8.
Install the side panels as described earlier in this chapter and power on the system.
9.
A
B
Installing Drive Cables
Upgrading Your System 4-37