Emergency Management Port Console - NEC EXPRESS 5800 ES1400 SERIES Online Service Manual

The above figure shows the EMP window in redirect state with the terminal window. The text that
appears on the server monitor displays in the redirect window.
Availability of the various EMP features is determined by two things: the EMP access mode
selected during configuration in the System Management Submenu of the BIOS Server Menu, and
if the server's COM 2 port is configured for console redirect in BIOS. The three EMP access modes
are disabled, pre-boot, and always active.
Mode Server is powered off
Disabled Redirect window appears, but is
blank
Pre-boot EMP commands available
Always Active EMP commands available
*The operation mode can be modified by selections in the post reset and post-power-up dialogs. These are server control
dialogs available with the EMP.
C-4 Emergency Management Port Console
Console in Redirect State
EMP Access Modes (Server Configured for Console Redirect)
During POST
Redirect window
Redirect window*
Redirect window*
After OS boots
Redirect window
Inactive redirect window
EMP commands available