Kenmore 1163511290 Owner's Manual page 18

To re-attach the base plate, insert the four tabs into
the four slots along the front edge of the base. Lower
the base plate to its original position.
Tab Locations
Base
Plate Tab
Slot onFront
Edgeof Base
Lift the front wheel assembly.
As the base plate is lowered, the left side will brush
against the front wheel.
"
On the right side, lift the latch hook slightly to place
the base plate into position. The base plate will not
close unless the base plate is under the latch hook,
Base
Plate
Latch _
Slide latches toward the center of the unit to secure.
Reposition
the front
wheels
forward
into the
operating
position.
Return the cleaner to the upright position before
plugging into the electrical outlet.
16