Kenmore 1163511290 Owner's Manual page 13

CHANGING
TO REMOVE BAG:
Press the Release Button
located on the top of
the bag cover.
Pull the bag cover
forward. Remove
and lay aside.
Grasp the dust
bag collar and
pull gently,
carefully removing
the dust bag.
Throw away the
used dust bag.
Do not reuse.
NEVER REUSE A DUST BAG. Very fine materials,
such as carpet fresheners, face powder, fine
dust, plaster, soot, etc. can clog the bag and
cause it to burst before it is full. Change bag
more often when vacuuming these materials.
Check the dirt tube
and the motor
safety filter.
If either is blocked,
check the
Troubleshooting
chaff on page 20.
TO REPLACE BAG:
Fold the safety
seal tab on
the new dust
bag away
from the
opening that
fits on the dirt
tube.
Dust Bag
(NOTE: See page 2 for Bag #.)
Seal Tab
Unfold the new
dust bag.
Insert the dust bag
onto the dirt tube
completely by holding
the bag collar.
Snap the dust bag
collar into position.
Be sure bottom
of dust bag is
completely
within bag
cavity prior to
replacing the
bag cover.
Body
P°siti°ning L j==_
Slot L
BagCover _ J'J__
Position the bag cover so its positioning tab fits into
the body positioning tab slot.
Close the bag cover.
You will hear a distinct
snap when cover is
securely closed.
11