GE AEM12 Series Owner's Manual And Installation Instructions page 4

About the controlson the air conditioner
Features and appearance will varg
Lights next to the touch pads on the air conditioner control panel indicate the selected settings.
Light indicatesthe unit
The displayalwaysshowsthe
is in the
temperature or
roomtemperatureexceptwhen delay
t ime Set mode.
setting the Set temperatureor 1
the Delaytimer. __i_ t
e _=o 77,o t
.... LVj
m Low w Cool
I
Light indicates the delay timer is set.
_1 Delay 1-24hr
Delaytimer , Delay timer Increase
Decrease
O Mode select , Auto Fan on/off
0 Fan speed , Fan speed Increase
Decrease
0 Temperature ) Unit power on/off
set Increase
and Decrease
Air ConditionerControls
Remote Control
Contro/s
O ower Pad
Turns air conditioner on _md off. _¥hen
turned on, tile display will show tile room
temperature.
0 Display
Shows tile room temperature or time
remaining on the Delay fimeL Shows the Set
mmpemture while setting the mmpetature in
Cool or Energy Saver modes. The Set light will
mrn on while setting.
NOTE: The display will change to show file
room temperature after settings have been
made. To recall the Set mmpemmre, press the
TempIncrease • or Decrease • pads.
O emp Increase •/Decrease • Pads
Use to set temperature when in Cool or Energy
Savermode. The Setlight will turn on while
setting.
O Delay fimerlncrease • (+)/Decrease • (-)
Pads
Each touch of the Increase •/Decrease •
pads on the unit or the Increase +/Decrease -
pads on the remote control will set the delay
time when using the
Delay 1-24hr
timer (@).
The Setlight will mrn on while setting.
O an Speed Pads
Use to set tile fan speed to LOW,Med, High
or Auto on the unit. NOTE: On the remote
control, use the fan speed Increase +/
Decrease - pads to set the fan speeds to LOW,
Med or High. Use the Auto pad to turn Auto
fan on.
O ode Pad
Use to set tlle air conditioner to Cool, Energy
Saver or Fan Only mode.
0
Delay Pads
Delay ON--When
the air conditioner is offl it
can be set to automatically come on in 1 to 24
hems at its previous mode and fan settings.
Delay OFF--When the air conditioner is on,
it can be set m automatically mrn off in 1 m
24 hems.
How toset:
Press file Delay 1-24hr pad on the unit or
die _ pad on file remora conuol. Each touch
of the Increase •/Decrease • pads on the
unit or the Increase +/Decrease- pads on
tile remote control will set the timer in
1-hour intervals.
The Set light will mrn on
while setting.
To review die remaining
time on die Delay
1-24hrtime_, press the Delay 1-24hr pad on the
unit or the 0" pad on the remote control. Use
the Increase •/Decrease • pads on the unit
or the Increase +/Decrease-pads on the
remote control
to set a new time if desired.
To cancel the timer, press tt_e Delay 1-24hr pad
until tile light on the Delay 1-24hr pad goes off:
4
Power Outage Recovery Feature
In tile case of a power outage
or interruption, tile
unit will automatically re-start in the settings last
used after tile power is restored. If tile
Delay
1-24hr
feature was set, it will resume countdown. You may
need to set a new time if desired.