Jumper Settings - Salus RT300 Instruction Manual

Salus RT300 Manual 002:89

JUMPER SETTINGS

Changes to the jumper settings should only be made by the Engineer carrying out the
installation or other qualified person.
The installer should select the jumper positions required if changes need to be made
to the factory default settings. These jumpers are found on the rear of the Control
Centre.
Jumper
Temperature Movable jumper for
Span
6
23/11/10
Function
± 0.5 ºC or ± 1.0 ºC span.
RT300 INSTRUCTION MANUAL
11:03 Page 6
Default
± 0.5 ºC span