Table of Contents
Advertisement
DRIVINGOR REMOVINGSCREWS
See Figures 10- 11.
[] Place the direction of rotation selector in the correct
position for the operation.
[] Hold the impact driver with one hand.
[] Place the bit on the screw head and slowly depress the
switch trigger. Start the bit slowly for more control.
[] As screw is driven, impacting will begin.
_JIL WARNING:
Do not drive a screw where there is
likely to be hidden wiring behind the surface. Con-
tact with a "live" wire will make exposed metal parts
of the tool "live" and shock the operator. If you must
drive a screw where hidden wire may be present,
always hold tool by insulated gripping surfaces
(handle) when performing the operation to prevent a
shock to the operator, as seen in figure 10.
_
RIGHT
0
0
0
0
Fig. 10
WRONG
Fig. 11
14
Advertisement
Table of Contents
